- July 3, 2019
- Posted by: Molding
- Category: Case Studies, Design Tips, Industry News, White Papers
In order to reduce internal stress and surface quality defects, the following seven problems should be paid attention to in the injection molding process of transparent ABS plastic materials (including the requirements of injection molding machine)
1. Special screw with separate temperature control nozzle should be used.
2. Injection temperature: under the premise that plastic resin does not decompose, it is advisable to use a higher injection temperature.
3. Injection pressure: generally higher, in order to overcome the melt viscosity of large defects, but the pressure is too high will produce internal stress to create a meme difficult and deformation.
4. Injection speed: in the case of mold filling, generally low, it is best to use slow – fast – slow multi – stage injection.
5. Pressure holding time and molding cycle: in the case of satisfying the product filling mold, no sag bubbles, should be as short as possible, in order to minimize the melting material in the barrel of the residence time.
6. Screw speed and back pressure: on the premise of meeting the quality of plasticizing, should be as low as possible, to prevent the possible solution.
7. Mold temperature: the product cooling quality, the quality of great influence, so mold temperature must be able to accurately control the process, if possible, mold temperature should be higher.
About JasonMould Industrial Company Limited
Jasonmould is a China mold maker of plastic molds- injection mold, die casting moulds, plastic blow molding, rotational molding, medical plastic injection molding, two shot plastic injection molding, insert molding, overmolding, metal injection molding, micro injection molding, powder injection molding, ceramic injection molding, liquid injection molding, husky injection molding, household mold, casting mold, die mold tool, custom molds, china moulds, rapid prototyping tooling, plastic prototyping tooling, punch press tooling, die and tooling for mobile/ cell phone parts, automotive parts, vacuum cleaners, rechargeable tools, telephones, copiers, computers, multimedia speakers, and many other electronic products and household appliances. And also a plastic product manufacturer, mold manufacturer China– plastic parts, plastic water tank, plastic balls, plastic containers, plastic buckle, plastic anchor, plastic hanger, plastic spoon, plastic pipe fitting, plastic tumble, plastic tableware, plastic cups, plastic bottles, plastic tray, plastic cosmetic container, plastic case, plastic food container, plastic chairs, plastic caps, plastic cap closure, plastic tubes, plastic water pipes, plastic knobs, plastic tubing, plastic utility boxes, plastic racks and so on.
Person: James Yuan
Company: JasonMould Industrial Company Limited
Add: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China
Email: [email protected]