- December 17, 2018
- Posted by: Molding
- Category: Industry News
Protection of mould
Because of the specificity, precision and vulnerability of mould, the safety protection of mould is very important. The following aspects are summarized as a whole:
Anti-rust: Prevent rusting caused by leakage/condensation/rain/fingerprints of injection moulds.
Anti-collision: Prevent the phenomenon of the mould crash caused by the breakage of the ejector pin and the failure of the ejector pin to fall back into place.
De-burring: Prevent the burr of mould caused by cloth/material punching/hand-wiping/nozzle clamp/knife touching.
Defects: Prevent the damage caused by the lack of parts such as pull rod/washer.
Pressure-proof: Prevent mould from being crushed by clamping the mould due to the remaining products.
Pressure protection: Prevent the damage caused by the excessive low pressure protection pressure of the mould.
Among them, more than 85% of the mould damage is caused by the breakage of the ejector pin, the inadequate return of the ejector pin, the residual products of the die and the lack of accessories, which are more frequent. The maintenance cost of the mould is generally higher, so how to avoid such a situation is directly related to the interests of the injection industry.
In order to prevent production delays caused by mould damage, as well as high maintenance costs, and to better save human resources, some companies have developed a product called “mould protector” using machine vision technology.
Mold monitor, or mould protector, also known as electronic eye of mould, can effectively protect expensive mould. Mould protection system of injection moulding machine, installed on the injection moulding machine, can directly check whether the product is qualified, and check whether there are residues before closing, in order to prevent clamping damage of the mould. During the operation of injection moulding machine, expensive moulds may be in danger of damage due to plastic residue or slider dislocation in each cycle. Anqi prevents these situations and automatically prevents closing of moulds and alarms when abnormal happens.
If the damage of mould is caused by the failure to take effective mould protection, we give you the following suggestions:
Cautions for mould maintenance:
When disassembling the mould, avoid bruising and move smoothly.
Mold anti-rust should be reduced to below 40 degrees.
The mould should be thoroughly inspected and rust-proof treatment: carefully wipe the moisture and sundries in the cavity, core, ejection mechanism and position, and spray the mould rust-proof agent and butter.
Maintenance of Mould
During the continuous working process of mould, the wear of parts, deterioration of lubricant, water leakage and crushing of plastic materials are easily caused by the movement process, so the maintenance of the mould is needed.
Mould maintenance is generally divided into routine maintenance and downward maintenance.
- Regular rust removal (appearance, PL surface, cavity, core, etc.)
- Regular re-lubrication (ejection mechanism, row position, etc.)
- Regular replacement of wearable parts (pull rods, bolts, etc.)
- Other things to be noted
Lower mould maintenance
Professional maintenance personnel are required to remove the mould, and then carry out professional maintenance and repair on the cavity and thimble of the mould.
JasonMould Industrial Company Limited, established in 2010, is a leading China mold factory. JasonMould specializes in plastic mould production for household appliances, medical equipments, electronic equipments, safety equipments as well as monitoring system.
The company has over 15000 square metres factory. With plastic injection tooling divisions possessing different machinery and expertise, JasonMould offers tools from small and precise mobile phone parts to as big as automotive parts. Our tools are mainly exported to U.S.A., Europe, Japan and UK. JasonMould’s diversification strategy and full service has won compliment from customers all over the world.
Our mission is to provide our customers high quality moulding products and services. We aim to exceed our customers’ expectations of pricing, quality and on-time delivery. To achieve our mission, JasonMould:
- Commits to continually improve employee skills and efficiency,
- Provides our employees a clean and safe working environment,
- Upgrades machine technology and support equipment through a strict maintenance program, and
- Maintains customers’ tooling to its highest peak of performance
Contact person: James Yuan
Company name: JasonMould Industrial Company Limited
Address: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China
Email: [email protected]